How to use products | INTRINSIC SHAVING

Yatta Bald Head Shaving Kit

Instructions

How to Use the Yatta Bald Head Shaving Kit
1. Prepare Your Scalp
Cleanse: Wash your scalp with a mild shampoo or AuZul Chocolate soap to remove any oils or residue. This helps in getting a smoother shave.

Exfoliate (Optional): Use a gentle exfoliating scrub to remove dead skin cells. This step can prevent ingrown hairs and make the shaving process smoother.

2. Set Up Your Shaving Area
Gather Supplies: Ensure you have the Yatta Bald Head Shaving Kit, which should include the razor, shaving cream, bald pomade, razors, razors blades, micro fiber cloth, any additional tools provided.
Hydrate: Apply a warm, damp micro fiber cloth to your scalp for a few minutes to soften the hair and open up pores.

3. Apply Yatta Shaving Cream
Non-Lather: Use the shaving brush or your fingers to apply a generous amount of shaving cream evenly over your scalp. This creates a protective layer that helps the razor glide smoothly.

4. Shave Your Scalp
Choose the Right Razor: In your kit includes the Yatta razors that best suits your preference for a close shave.
Shave: Begin shaving with gentle, slow strokes. Shave in the direction of hair growth to reduce irritation. For a closer shave, you may shave against the grain, but be cautious as this can cause irritation for some people.
Rinse: Frequently rinse the razor blade under warm water to keep it clean and prevent clogging.

5. Post-Shave Care
Rinse: Once you’ve finished shaving, rinse your scalp with cool water and a ice cube to close the pores.
Pat Dry: Gently pat your scalp dry with the micro fiber cloth.
Apply Yatta Aftershave : Use Yatta aftershave bald pomade to hydrate and calm the skin. Our pomade is designed for sensitive skin to avoid irritation.

6. Clean and Maintain Your Kit
Clean Razor: Rinse the razor thoroughly and let it dry completely before storing.
Store Properly: Keep the razor and shaving tools in a dry place to prevent rust and damage.
Replace Blades: Regularly replace the blades as needed to ensure a sharp, effective shave.

Tips for Best Results
Shave After a Shower: Shaving after a shower or using a warm towel helps in softening the hair and opening pores.
Avoid Pressure: Let the razor do the work—pressing too hard can lead to cuts and irritation.
Hydrate: Keep your scalp well-hydrated with regular moisturization to maintain healthy skin.

By following these steps, you’ll achieve a smooth and comfortable shave with your Yatta Bald Head Shaving Kit.

Kenso Shaving Kit

Instructions

Kenso Shaving Kit: Step-by-Step Guide

Step 1: Prepare Your Face

Cleanse: Begin by washing your face with warm water and a gentle cleanser to remove dirt and oil. This will soften your facial hair and open up your pores, making the shave smoother.
Hydrate: Rinse your face thoroughly with warm water. Leave your skin slightly damp to help the shaving cream work more effectively.

Step 2: Apply Kenso Shaving Cream

Dispense: Squeeze a small amount of Kenso Shaving Cream on to your Kenso brush or into your hands.
Apply: Gently massage the non-lathering shaving cream onto your face in circular motions, ensuring an even coverage over the area you wish to shave. The shaving cream will go, onto your skin as white, but once your massage into your skin it will become clear. This is where the non-foaming comes into play, that is different them traditional shaving cream.

Step 3: Shave with the Kenso Razor

Choose Your Setting & putting the Blade in: Your Kenso Razor is adjustable, select the blade setting that best suits your beard type and skin sensitivity. The 1 is for a closer aggressive shave 2 & 3 our for a mid level shave 5 & 6 our for cleaning up and maintenance to your shaving routine.
When insert the Blade:Handle the Blade Carefully: Hold the razor blade by its dull sides to avoid cutting yourself. Never touch the sharp edge. When holding the blade how like you are making a OK singla with your fingers. Look at our how to videos in the video section of this website.
Place the Blade: Align the blade with the grooves or notches on the bottom plate of the razor. The blade should sit flat and securely in place, with the sharp edge facing outward.
Position the Top Plate: Once the blade is in place, position the top plate over the blade. Ensure it aligns properly with the bottom plate and that the blade is centered between the plates.
Shave: Hold the razor at a 30-degree angle to your skin. Start shaving with the grain (in the direction your hair grows) to reduce irritation. Use short, gentle strokes, and let the razor do the work—avoid pressing too hard.
Rinse the Blade: Rinse the razor frequently under warm water to keep the blades clean and free of buildup.

Step 4: Rinse and Inspect

Rinse Your Face: After shaving, rinse your face with cool water and apply an ice cube to help close your pores, and remove any remaining shaving cream, that will help remove any RaZor bumps.
Check for Missed Spots: Run your fingers over your face to check for any areas you may have missed. If necessary, reapply shaving cream to those areas and gently shave again. What every you do don't press hard the raZor is design to be heavy to help eliminate RaZor bumps.

Step 5: Aftercare

Dry: Pat your face dry with a clean towel—avoid rubbing to prevent irritation.
Apply Kenso Aftershave Lotion: Finish your shave by applying a small amount of Kenso Aftershave Lotion to soothe and moisturize your skin. This helps prevent irritation and keeps your skin feeling fresh and smooth.

Tips for the Best Shave

Shave After a Shower: Shaving after a warm shower can make the experience more comfortable, as the steam helps soften your beard.
Use Fresh Blades: Replace your razor blade regularly to ensure a close, comfortable shave and reduce the risk of nicks and irritation.
Moisturize Daily: Keep your skin hydrated daily to maintain a healthy, irritation-free complexion.

ZEN Shaving Kit

Instructions

How to Insert a Single-Edge Razor Blade into the Kenso Razor

Step 1: Prepare Your Razor

Disassemble: Hold the razor handle firmly and unscrew the razor head by turning it counterclockwise. Separate the top plate, the blade holder (if applicable), and the bottom plate.
Lay Out the Parts: Place the disassembled parts on a flat, clean surface. Ensure you have the top plate, bottom plate, and the single-edge razor blade.

Step 2: Insert the Blade

Handle the Blade Carefully: Hold the razor blade by its dull sides to avoid cutting yourself. Never touch the sharp edge.
Place the Blade: Align the blade with the grooves or notches on the bottom plate of the razor. The blade should sit flat and securely in place, with the sharp edge facing outward.
Position the Top Plate: Once the blade is in place, position the top plate over the blade. Ensure it aligns properly with the bottom plate and that the blade is centered between the plates.

Step 3: Secure the Razor Head

Reassemble: Hold the bottom plate and the top plate together, keeping the blade sandwiched between them.
Screw the Head Back On: Attach the assembled head back onto the razor handle by turning it clockwise until it is securely tightened. Ensure that the blade is evenly exposed on both sides and that the head is snug.

Step 4: Inspect Your Razor

Check Blade Alignment: Before using the razor, double-check that the blade is properly aligned and evenly exposed. The blade should be straight and securely held in place without any wobbling.
Test the Tightness: Gently shake the razor to ensure that the head is firmly attached and that there is no movement of the blade.

Important Safety Tips

Always Handle the Blade with Care: Razor blades are extremely sharp. Take your time when inserting or removing a blade to avoid cuts.
Replace Blades Regularly: A dull blade can lead to an uncomfortable shave and increase the risk of nicks and irritation. Replace the blade as needed to ensure a smooth shave.
Store Safely: When not in use, store your razor and spare blades in a safe place away from children or pets.
Kenso Shaving Kit: Step-by-Step Guide
Step 1: Prepare Your Face
Cleanse: Begin by washing your face with warm water and a gentle cleanser to remove dirt and oil. This will soften your facial hair and open up your pores, making the shave smoother.
Hydrate: Rinse your face thoroughly with warm water. Leave your skin slightly damp to help the shaving cream work more effectively.
Step 2: Apply Kenso Shaving Cream
Dispense: Squeeze a small amount of Kenso Shaving Cream on to your Kenso brush or into your hands.
Apply: Gently massage the non-lathering shaving cream onto your face in circular motions, ensuring an even coverage over the area you wish to shave. The shaving cream will go, onto your skin as white, but once your massage into your skin it will become clear. This is where the non-foaming comes into play, that is different them traditional shaving cream.
Step 3: Shave with the Kenso Razor
Choose Your Setting & putting the Blade in: Your Kenso Razor is adjustable, select the blade setting that best suits your beard type and skin sensitivity. The 1 is for a closer aggressive shave 2 & 3 our for a mid level shave 5 & 6 our for cleaning up and maintenance to your shaving routine.
When insert the Blade:Handle the Blade Carefully: Hold the razor blade by its dull sides to avoid cutting yourself. Never touch the sharp edge. When holding the blade how like you are making a OK singla with your fingers. Look at our how to videos in the video section of this website.
Shave: Hold the razor at a 30-degree angle to your skin. Start shaving with the grain (in the direction your hair grows) to reduce irritation. Use short, gentle strokes, and let the razor do the work—avoid pressing too hard.
Rinse the Blade: Rinse the razor frequently under warm water to keep the blades clean and free of buildup.
Step 4: Rinse and Inspect
Rinse Your Face: After shaving, rinse your face with cool water and apply an ice cube to help close your pores, and remove any remaining shaving cream, that will help remove any RaZor bumps.
Check for Missed Spots: Run your fingers over your face to check for any areas you may have missed. If necessary, reapply shaving cream to those areas and gently shave again. What every you do don't press hard the raZor is design to be heavy to help eliminate RaZor bumps.
Step 5: Aftercare
Dry: Pat your face dry with a clean towel—avoid rubbing to prevent irritation.
Apply Kenso Aftershave Lotion: Finish your shave by applying a small amount of Kenso Aftershave Lotion to soothe and moisturize your skin. This helps prevent irritation and keeps your skin feeling fresh and smooth.
Tips for the Best Shave
Shave After a Shower: Shaving after a warm shower can make the experience more comfortable, as the steam helps soften your beard.
Use Fresh Blades: Replace your razor blade regularly to ensure a close, comfortable shave and reduce the risk of nicks and irritation.
Moisturize Daily: Keep your skin hydrated daily to maintain a healthy, irritation-free complexion.

Screenshot 2020-10-15 at 8.39_edited.jpg

Azul Liquid Lotion & Chocolate Soap

Instructions

Here are some tips for using Chocolate soap in the shower:

Wet your skin: Before applying soap, wet your skin with a quick rinse.
Create a lather: Rub the bar of soap between your hands or on a washcloth, loofah, or soap mitt to create a lather.
Apply the lather: Start at the top of your body and work your way down, applying the lather to your wet skin.
Rinse: Rinse your body thoroughly to remove all soap residue.
Use a clean cloth or loofah: If you use a washcloth or loofah, use a clean one each time and wash it after use.
Use a wooden soap rack: A wooden soap rack can be used in the bathroom or kitchen sink. You can put a small dish underneath to catch dripping water.
Use an oil-infused bar soap:

How to apply AZUL Liquid lotion :

Apply to damp skin: Applying lotion to damp skin, like after a shower or bath, helps your skin absorb it and lock in hydration. Massage in gently: Use your fingertips to gently massage the lotion into your skin. Don't over-apply: Avoid applying too much lotion.
Apply after cleansing: Apply lotion after washing your face or after using a cleanser. Apply before sunscreen: If you're using lotion for hydration, apply it before applying sunscreen.
Apply at night: At night, moisturizer is usually the last thing you apply to your face. Reapply in the middle of the day: If your skin is very dry, you can reapply moisturizer in the middle of the da
Apply to your neck: Don't forget to apply lotion to your neck. Use a lighter product: If you're reapplying lotion in the middle of the day, you can use a lighter product or a moisturizing spray.
Liquid-based moisturizers are typically light and water-based, which allows the hydrating ingredients to penetrate deeper into the skin.

INTRINSIC

SHAVING

THE EVOLUTION OF GROOMING

https://nyweekly.com/lifestyle/intrinsic-shaving-grooming-for-black-men/

Yatta Bald Head Shaving Kit